TELESCOPIC, ARTICULATING AERIAL LIFT WITH WORKING HEIGHTS TO 49 FEET.

Telescopic articulating design for greater side reach and working heights, providing up and over capabilities. Mounts on 17,500 GVWR chassis. Available in insulated or non-insulated models..

• Up to 44' of working height with DTAX-39.

• Up to 49' of working height with DTAX-44. 

• 28' of side reach with DTAX-39.

• 30' of side reach with DTAX-44.

Click on the image at right for full data sheet.

Data Sheet is a PDF file and requires Adobe Reader to view. click the link below to download Adobe Reader for free.

CONTROLS:

• Full pressure proportional controls.

• Lower controls with override located at the turntable..

• Engine start/stop from the basket.

HYDRAULIC SYSTEM:

• Rated pressure is 2200 PSI.

• Operating pressure is 2000 PSI.

• 5 GPM pump requirement.

• 10 gallon oil reservoir.

• 180 degree rotating basket.

MECHANICAL SYSTEM:

• Telescoping and articulating boom action.

• Offset main boom reduces travel height.

• Shear ball rotation driven by fully enclosed worm gear box.

SAFETY FEATURES:

• Integral holding valves in all cylinders.

• Pressure relief valve.

• Non-conductive hoses.

• 46KV Category “C” on insulated models.

• Safety harness and lanyard.

• Lower override controls.

• Fiberglass extension boom.  

OPTIONAL FEATURES:

• Continuous rotation.  

• 12 volt D.C. backup.  

• Outriggers.

• Single hand controls.  

• Basket liner.  

• Throttle advance.  

• Fiberglass main boom.  

• Fiberglass articulating boom.  

• Non-insulated units available.  

To Contact Us:
Address: 317 Route 27 Raymond,NH. 03077
Phone: 603-895-3803 Fax: 603-895-4866
Email:
Kirk Messing - Sales: kirkm@raymondbucketguys.com
Joe Howes - Sales: joeh@raymondbucketguys.com
Mike Hubbard - Parts Manager: mikeh@raymondbucketguys.com
Paul Hodgdon - Service Manager: paulh@raymondbucketguys.com