Enter your keyword

Wakefield

Wakefield

IN Bucket Truck, DUR-A-LIFT
Client Name:

Wakefield
Date Completed:

May 2019
Location:

About Project

Aerial Device

DHT-34FP  Insulated  telescopic aerial platform lift.

39’ of working height

26’ Side Reach

Platform capacity:

350 lbs

Bucket mounted hydraulic controls which include:

3 Axis Non-High Electrical Resistance “Single Stick” Control

Emergency Power

Engine Start/Stop

180 deg bucket rotator

Bucket Lower Stow Control

24” x 30” x 42” fiberglass bucket

Vinyl cover with lanyard

Bucket Liner

Insulation:

Inner Telescopic Boom

Upper Boom Wrap

Stabilization:

Torsion Bars on rear

Timbren Load Stabilizer on front

Safety:

Parking Brake Interlock

360 deg Continuous rotation.

Emergency Power Insulated 12V DC hydraulic system.

2 Year Warranty

 

Capstan

Advanced Construction Products, model #B30F capstan

 

Brand FX Fiberglass Service Body, BFXB-84-T

Body Dimensions:

132” long x 40” high x 94” wide.

84” CA with dual rear wheels.

48” compartment height

18” compartment depth

30” body mounting height

.1875 Aluminum treadplate floor

Tailboard brackets

Aluminum lined loadbed walls

 

Streetside Compartmentation:

Front

30.5” wide

Two (2) adjustable shelves

 

2nd  Front

30.5” wide

One (1) adjustable shelf

 

Horizontal Compartment

40” wide

One (1) adjustable shelf

 

Rear Vertical

24.5” wide

Open

 

Curbside Compartmentation

Front

30.5” wide

  • Two (2) adjustable shelves

 

2nd Front

30.5” wide x 40” high x 18” deep

Two (2) adjustable shelves

 

Horizontal Compartment

40” wide

Open layout

 

Rear Vertical

31” wide

0-2-1 Rope Hooks

 

Tailshelf

            Aluminum Treadplate surfaced, structurally supported, 30” deep tailshelf

LED ICC lighting to include stop/turn/tail and back lights

Curbside stepway access with aluminum grab loop access handle

Flexible stepway access step

Chrome grab handle on rear compartment bulkhead

Rear ICC bumper with 2” receiver mounting for a future hitch, chain loops and 7 pin flat trailer socket with cover

 

Striping

Full width red/white conspicuity marking to be supplied on rear bumper

4” wide white “reverse Z” stripe

 

Electrical:

Warning Lights:

Whelen 56” Justice Light Bar mounted on cab roof.  The light bar will be configured as follows:

Eight (8) forward facing red “CON 3” LED’s

Whelen model #M7RC red LED’s with chrome flanges mounted as follows:

Two (2) on cab grille

Two (2) rear of body, mounted high

Siren System:

Whelen model #295SL100 Electronic Siren is to be provided and mounted on a upright vertical bracket on the cab floor

One (1) Whelen model #SA315P speaker and appropriate mounting bracket

 

Floodlighting:

Two (2) Akron Floods, model #ELRE-SLDC, 12 vdc LED floods shall have 19,000 lumens, and a local switch and are to be mounted as follows:

One (1) telescopic on the curbside front body bulkhead.

One (1) non-telescopic version mounted on top of the compartment side just forward of the step way

Bucket Work Lighting:

One (1) Streamlite E Flood LED Litebox with a 12 vdc charger is to be supplied and installed in the cab

One (1) PTI LBH2-Y Bucket “hang-on” Mounting Box is to be supplied

120 VAC Power:

Ultimate Power model #UP200SD, 2000 watt, Pure Sine Inverter, installed in front compartment Two (2) Deep Cycle batteries, in marine boxes installed in the forward load bed area.  The inverter shall be properly fused, equipped with load sized cables and be covered in loom, Cab switch controlled operation

 

Located on the rear of the body at the stepway a 120 VAC GFCI Duplex Outlet and a weatherproof Cover will be provided

Ladder Rack:

An Able Products, angled “top mounted” ladder rack is to be supplied.  The ladder rack is to constructed of extruded aluminum, stainless steel hardware, include a guide rail system and a QUIK-LOCK locking, ladder restraint.

Additional equipment:

Two (2) Inclinometer, installed on cab dash, viewable by operator

Two (2) Mudflaps

Fire extinguisher with bracket, 5#

Reflector kit

First aid Kit

Two (2) Composite wheel chocks

One (1) Wilton model #674 Vise and mounting on tailshelf