Enter your keyword

Mass DOT

Mass DOT

IN Bucket Truck, DUR-A-LIFT
Client Name:

Mass DOT
Date Completed:

June 2019

About Project


DTAX-39-FP Insulated 39’ telescopic / articulating aerial platform lift.
44’ of working height
46 kV, Category Insulation
Bucket mounted controls to include:
4 Axis Single Hand Control
Hydraulic tool outlets with MassDOT compatible fittings
Emergency Power
Bucket Cover
Bucket Liner with integral step
180º platform rotator.
Full pressure turret mounted lower controls with override.
Continuous rotation.
Lower Boom Insulating Section
Fiberglass inner telescopic boom.
Non-relube bearings used throughout.
Integral hydraulic oil reservoir with dual sight gauges and 17 gallon capacity.
Closed 24” x 30” x 42” fiberglass platform with one curbside step.
Emergency Power Insulated 12V DC hydraulic system.
Master / Slave hydraulic leveling with upper and lower control to tilt for cleanout or rescue.
Rear Torsion Bar
Front Timbren Load Bushings
Upper boom storage cradle with ratchet type tie down strap and tubular rubber platform support.
PTO driven hydraulics
Open circuit operation


Tail shelf 

Tread plate, 30” x 94”, side placed “Safe Step” curbside access
OSHA 3 point grab handle-loop type grab railing and body mounted grab handle
Flex step mounted be step-way
LED ICC lighting
ICC bumper 2” receiver for hitch, trailer plug and equipped with chain loops
7 Blade Trailer Plug, wired per Mass DOT
7-6 Pin Trailer Plug Adapter
2” Ball/Pintle Hitch
LED Stop/Turn/Tail Lights and Backup Lights installed in tail shelf


Brand FX Fiberglass Service Body, FB-84

Body Dimensions:

132” long x 42” high x 94” wide.
84” CA with dual rear wheels.
42” compartment height
18” compartment depth
54” load space width
25” top of body to the top of the floor


Standard Features:

Vinyl rock guards
Gas fill cup
Removable wheel panels
White compartment interiors
LED exterior stop/tail/turn, backup and ICC lighting
Automotive grade door gaskets
Aluminum forward bulkhead
Aluminum tailskirt
Stainless steel hinges and hardware
Stainless steel automotive style rotary latch
Brackets for adjustable shelves in all compartments
One piece molded doors
Recessed door seal system
Flow thru ventilation system
Treadplate floor
Tailboard brackets
MassDOT “Safety Yellow” Gel Coat exterior
Flex Glo Compartment Lights


Warning Lights:

Two (2) Whelen  #IONA, amber LED’s installed on cab grille
Two (2) Whelen  #700, amber LED’s installed on rear body
One (1) Whelen  #FW42AAAA-MADOT Freedom Lightbar, mounted on cab roof
Whelen Traffic Advisor model TAD8 – TADCTRL1-(2)/TADSW1, mounted on rear tailshelf
Havis Console for Ford F Series Superduty, #C-VS1100-F150-2

120 VAC Power:

Ultimate Power Inverter, model #UP12/1000PCUL, UL listed, installed per MassDOT

Additional to be supplied:

ECCO, model #EW300X, LED bulb, magnetic base and wireless remote control
PTI, Hang On Bucket Tray
Streamlight Stinger Rechargeable Flashlight