317 Rte 27, Raymond, NH 03077

Dur-A-Lift Custom Bucket Trucks & DINOlift Aerial Lifts

No items found.

Advantage Utilities

Build Overview

Specs

  • 2023 Ford E350 7.3 gas engine, single rear tire axle 10,500 GVW Reading Aluminum CSV Body Interior:
  • 76" minimum interior height
  • Double rear doors
  • Interior light with switching

Lift Specs

  • DVS-29 30' telescopic aerial, insulated
  • Pedestal Riser
  • 30' of platform height
  • 35' of working height
  • 21' side reach
  • Platform capacity of 350 lbs.
  • 370-degree non-Continuous rotation.
  • Open center hydraulic system
  • Non-relube bearings used throughout,
  • Integral hydraulic oil reservoir with dual sight gauges
  • Emergency Power Insulated 12V DC hydraulic system.
  • Master / Slave hydraulic leveling with upper and lower control to tilt for cleanout or rescue.
  • Lower remote controls mounted in rear compartment
  • Upper boom storage cradle with ratchet type tie down strap and tubular rubber platform support.
  • Body harness and lanyard.
  • Standard white urethane paint,
  • Two operator's manuals and two service manuals,
  • ANSI A92.2 Data plate.
  • Internal hydraulic tank
  • Generator driven hydraulic pump
  • Open circuit operation
  • Emergency Brake Interlock

Splicing/Interior Specs

  • One (1) Birch countertop installed on the top of the curbside side compartment structure. Counters shall extend from the rear of the body and be approximately 96" long x 24" wide x by 2" thick.
  • One (1) curbside corner hinged splicing door
  • Fasclamp Fiber hold down fixture
  • Streetside compartment tops left open
  • Three (3) ECCO #EW602, 33" LED ceiling light, 12 vdc, switched and mounted on the ceiling above the counter. Controlled by a switch at the rear doors
  • One (l) Ventline 14" x 14" Roof Vent, with crank open dome and 12 vdc powered integral fan. Controlled by a switch at the rear doors
  • One (l) 24" x 15" curbside sliding body window with screen
No items found.

Advantage Utilities

Build Overview

Specs

  • 2023 Ford E350 7.3 gas engine, single rear tire axle 10,500 GVW Reading Aluminum CSV Body Interior:
  • 76" minimum interior height
  • Double rear doors
  • Interior light with switching

Lift Specs

  • DVS-29 30' telescopic aerial, insulated
  • Pedestal Riser
  • 30' of platform height
  • 35' of working height
  • 21' side reach
  • Platform capacity of 350 lbs.
  • 370-degree non-Continuous rotation.
  • Open center hydraulic system
  • Non-relube bearings used throughout,
  • Integral hydraulic oil reservoir with dual sight gauges
  • Emergency Power Insulated 12V DC hydraulic system.
  • Master / Slave hydraulic leveling with upper and lower control to tilt for cleanout or rescue.
  • Lower remote controls mounted in rear compartment
  • Upper boom storage cradle with ratchet type tie down strap and tubular rubber platform support.
  • Body harness and lanyard.
  • Standard white urethane paint,
  • Two operator's manuals and two service manuals,
  • ANSI A92.2 Data plate.
  • Internal hydraulic tank
  • Generator driven hydraulic pump
  • Open circuit operation
  • Emergency Brake Interlock

Splicing/Interior Specs

  • One (1) Birch countertop installed on the top of the curbside side compartment structure. Counters shall extend from the rear of the body and be approximately 96" long x 24" wide x by 2" thick.
  • One (1) curbside corner hinged splicing door
  • Fasclamp Fiber hold down fixture
  • Streetside compartment tops left open
  • Three (3) ECCO #EW602, 33" LED ceiling light, 12 vdc, switched and mounted on the ceiling above the counter. Controlled by a switch at the rear doors
  • One (l) Ventline 14" x 14" Roof Vent, with crank open dome and 12 vdc powered integral fan. Controlled by a switch at the rear doors
  • One (l) 24" x 15" curbside sliding body window with screen

Interested in a custom bucket truck or DINO for your business?
Get started today.