Columbia Splicing Unit
Truck Specs
- VS-29-TS 29’ telescopic aerial, non insulated
- Pedestal Riser, 22”
- 29’ of platform height
- 34’ of working height
- 21’ side reach
- Platform capacity of 350 lbs.
Bucket - 24” x 24” x 42”
- Walk thru bucket with door
- Electric Controls
- Emergency Power
- Engine Start/Stop
- Bucket Cover
- 370 degree Non-Continuous rotation.
- Three GPM open center hydraulic system
- Non-relube bearings used throughout.
- Integral hydraulic oil reservoir with dual sight gauges
- Emergency Power Insulated 12V DC hydraulic system.
- Master / Slave hydraulic leveling with upper and lower control to tilt for cleanout or rescue.
- Lower remote controls mounted in rear compartment
- Rear torsion bar stabilization
- Upper boom storage cradle with ratchet type tie down strap and tubular rubber platform support.
- Body harness and lanyard.
- Standard white urethane paint.
- Two operator’s manuals and two service manuals.
- ANSI A92.2 Data plate.
- 10 Gallon internal hydraulic tank
- Engine driven hydraulic pump
- Open circuit operation
- Emergency Brake Interlock
Body Specs
- Brand FX Fiberglass Service Body, BFXB-84
- Body Dimensions:
- 132” long x 42” high x 94” wide.
- 84” CA with dual rear wheels.
- 42” compartment height
- 20” compartment depth
- 25” body mounting height
- Standard Features:
- Vinyl rock guards
- Gas fill cup
- Steel understructure
- White compartment interiors
- Recessed LED exterior stop/tail/turn, backup and ICC lighting
- Automotive grade door gaskets
- Aluminum forward bulkhead
- Aluminum tailskirt
- Stainless steel hinges and hardware
- Stainless steel automotive style rotary latch
- LED Flexglo Compartment Lighting
- One piece molded doors
- Recessed door seal system
- Flow thru ventilation system
- Treadplate floor
Columbia Splicing Unit
Truck Specs
- VS-29-TS 29’ telescopic aerial, non insulated
- Pedestal Riser, 22”
- 29’ of platform height
- 34’ of working height
- 21’ side reach
- Platform capacity of 350 lbs.
Bucket - 24” x 24” x 42”
- Walk thru bucket with door
- Electric Controls
- Emergency Power
- Engine Start/Stop
- Bucket Cover
- 370 degree Non-Continuous rotation.
- Three GPM open center hydraulic system
- Non-relube bearings used throughout.
- Integral hydraulic oil reservoir with dual sight gauges
- Emergency Power Insulated 12V DC hydraulic system.
- Master / Slave hydraulic leveling with upper and lower control to tilt for cleanout or rescue.
- Lower remote controls mounted in rear compartment
- Rear torsion bar stabilization
- Upper boom storage cradle with ratchet type tie down strap and tubular rubber platform support.
- Body harness and lanyard.
- Standard white urethane paint.
- Two operator’s manuals and two service manuals.
- ANSI A92.2 Data plate.
- 10 Gallon internal hydraulic tank
- Engine driven hydraulic pump
- Open circuit operation
- Emergency Brake Interlock
Body Specs
- Brand FX Fiberglass Service Body, BFXB-84
- Body Dimensions:
- 132” long x 42” high x 94” wide.
- 84” CA with dual rear wheels.
- 42” compartment height
- 20” compartment depth
- 25” body mounting height
- Standard Features:
- Vinyl rock guards
- Gas fill cup
- Steel understructure
- White compartment interiors
- Recessed LED exterior stop/tail/turn, backup and ICC lighting
- Automotive grade door gaskets
- Aluminum forward bulkhead
- Aluminum tailskirt
- Stainless steel hinges and hardware
- Stainless steel automotive style rotary latch
- LED Flexglo Compartment Lighting
- One piece molded doors
- Recessed door seal system
- Flow thru ventilation system
- Treadplate floor
Interested in a custom bucket truck or DINO for your business?
Get started today.