‍Lift Specs

• DTAX-44Insulated 44’ telescopic / articulating aerial platform lift.
• 49’ of working height
• 30’ of side reach
• -30 degree to +75 degree main boom travel
• 0 degree to +74 degree lower boom travel
• Platform capacity of 350 lbs.
• Non Insulated
• Bucket options and controls to include:
• 24” x 24” x 42” Fiberglass Bucket
• 4 Axis Single Hand Control
• Side Access Door
• 12VDC Emergency Power
• Engine Start/Stop
• 180 degree Bucket Rotation
• Bucket Cover
• Full pressure turret mounted lower controls with override.
• Continuous rotation.
• Open center hydraulic system
• Non-relube bearings used throughout.
• Integral hydraulic oil reservoir with dual sight gauges and 10 gallon capacity.
• Emergency Power 12V DC hydraulic system.
• Master / Slave hydraulic leveling with upper and lower controls

Stabilization

• Front “H” frame mounted outriggers
• Outrigger Down Interlocks
• Two (2) Dica Outrigger Pads with Holders
• Aluminum treadplate outrigger covers
• Upper boom storage cradle with ratchet type tie down strap and tubular rubber platform support.
• Full Body Harness and 6’ Fall Arresting Lanyard.
• Standard white urethane paint.
• Two operator’s manuals and two service manuals.
• ANSI A92.2 Data plate.
• Engine belt drive operated hydraulic pump

Body

• Blue Ridge Custom Flat Bed Body
• Steel decked, Flat Bed Body
• 12’ Long
• 96” wide
• Cross member 12” on center
• 5” Long body sills
• .125” steel floor
• ICC Bumper to include the following:
• Trailer Plug, 7 way, RV type
• 2.5” Receiver Tube
• Recessed LED Lighting, shock mounted
• Notched, body access stepway with aluminum grab loop railings
• Flexible Access Step
• LINEX rubberized non skid coating