317 Rte 27, Raymond, NH 03077
Dur-A-Lift Custom Bucket Trucks & DINOlift Aerial Lifts
.svg)
ATTN: Our office will be closed Monday, December 25th. Merry Christmas!
No items found.
Gorham DPW
Build Overview
Lift Specs
- DTAXS2-39FP Non-insulated 39’ telescopic / articulating aerial platform lift
- 44’ of working height
- 28’ of side reach
- -25 degree to +78 degree main boom travel -2 degree to +80 degree lower boom travel Platform capacity of 350 lbs.
- Bucket options and controls to include:
- Bottom mount bucket
- 24” x 24” x 42” Fiberglass Bucket
- 4 Axis Single Hand Control
- 12VDC Emergency Power
- Engine Start/Stop
- Bucket Cover Insulation to include:
- Lower Boom Fiberglass End
- Telescopic Inner Fiberglass Boom
- Lower Boom Fiberglass Insert Compensation Link Fiberglass Insert 180º platform rotator
- Full pressure turret mounted lower controls with override
- Continuous rotation
- Walk-in basket with door
- Five GPM open center hydraulic system
- Non-relube bearings used throughout.
- Integral hydraulic oil reservoir with dual sight gauges and 10 gallon capacity.
- Emergency Power 12V DC hydraulic system.
- Master / Slave hydraulic leveling with upper and lower controls
- Rear Torsion Bar Stabilization
- Front Timbren Stabilization Bushings
- Upper boom storage cradle with ratchet type tie down strap and tubular rubber platform support
- Body Harness and lanyard
- Standard white urethane paint.
- Two operator’s manuals and two service manuals.
- ANSI A92.2 Data plate.
- PTO operated hydraulic pump
- Open circuit operation
Body Specs
- Service Body, Reading, model #CS132DCA
- 132” long x 40” high x 93” wide.
- 84” CA with dual rear wheels.
- 40” compartment height
- 21.5” compartment depth
- 24.75” load bed height
- Standard Features:
- Steel Construction
- Gas fill cup
- Recessed LED exterior stop/tail/turn, backup and ICC lighting
- Automotive grade door gaskets
- Aluminum forward bulkhead
- Hidden stainless steel hinges
- Stainless steel automotive style latch
- Brackets for adjustable shelves in all compartments
- Treadplate floor
- White powdercoat finish
- Taillight and Harness Adapter
- Compartment lighting throughout interior compartments
- 4” round bed lights in loadbed
- Tailshelf
- Aluminum treadplate surfaced, structurally supported, 30” deep tailshelf
- LED ICC lighting
- Curbside stepway access
- Bucket access step
- Aluminum grab loop access handle
- Angled chrome grab handle on rear compartment bulkhead
- Rear ICC bumper predrilled for hitch, trailer plug and equipped with chain loops
- Combination Hitch with 2” Ball
- 7 Pin Flat Trailer Plug
Heading
TEST
Product Overview
Headings, paragraphs, blockquotes, figures, images, and figure captions can all be styled after a class is added to the rich text element using the "When inside of" nested selector system.
Rich Text Element
What’s a Rich Text element?
The rich text element allows you to create and format headings, paragraphs, blockquotes, images, and video all in one place instead of having to add and format them individually. Just double-click and easily create content.
The rich text element allows you to create and format headings, paragraphs, blockquotes, images, and video all in one place instead of having to add and format them individually. Just double-click and easily create content.
Static and dynamic content editing
Static and dynamic content editing
A rich text element can be used with static or dynamic content. For static content, just drop it into any page and begin editing. For dynamic content, add a rich text field to any collection and then connect a rich text element to that field in the settings panel. Voila!
A rich text element can be used with static or dynamic content. For static content, just drop it into any page and begin editing. For dynamic content, add a rich text field to any collection and then connect a rich text element to that field in the settings panel. Voila!
How to customize formatting for each rich text
How to customize formatting for each rich text
Headings, paragraphs, blockquotes, figures, images, and figure captions can all be styled after a class is added to the rich text element using the "When inside of" nested selector system.
Headings, paragraphs, blockquotes, figures, images, and figure captions can all be styled after a class is added to the rich text element using the "When inside of" nested selector system.
No items found.
Gorham DPW
Build Overview
Lift Specs
- DTAXS2-39FP Non-insulated 39’ telescopic / articulating aerial platform lift
- 44’ of working height
- 28’ of side reach
- -25 degree to +78 degree main boom travel -2 degree to +80 degree lower boom travel Platform capacity of 350 lbs.
- Bucket options and controls to include:
- Bottom mount bucket
- 24” x 24” x 42” Fiberglass Bucket
- 4 Axis Single Hand Control
- 12VDC Emergency Power
- Engine Start/Stop
- Bucket Cover Insulation to include:
- Lower Boom Fiberglass End
- Telescopic Inner Fiberglass Boom
- Lower Boom Fiberglass Insert Compensation Link Fiberglass Insert 180º platform rotator
- Full pressure turret mounted lower controls with override
- Continuous rotation
- Walk-in basket with door
- Five GPM open center hydraulic system
- Non-relube bearings used throughout.
- Integral hydraulic oil reservoir with dual sight gauges and 10 gallon capacity.
- Emergency Power 12V DC hydraulic system.
- Master / Slave hydraulic leveling with upper and lower controls
- Rear Torsion Bar Stabilization
- Front Timbren Stabilization Bushings
- Upper boom storage cradle with ratchet type tie down strap and tubular rubber platform support
- Body Harness and lanyard
- Standard white urethane paint.
- Two operator’s manuals and two service manuals.
- ANSI A92.2 Data plate.
- PTO operated hydraulic pump
- Open circuit operation
Body Specs
- Service Body, Reading, model #CS132DCA
- 132” long x 40” high x 93” wide.
- 84” CA with dual rear wheels.
- 40” compartment height
- 21.5” compartment depth
- 24.75” load bed height
- Standard Features:
- Steel Construction
- Gas fill cup
- Recessed LED exterior stop/tail/turn, backup and ICC lighting
- Automotive grade door gaskets
- Aluminum forward bulkhead
- Hidden stainless steel hinges
- Stainless steel automotive style latch
- Brackets for adjustable shelves in all compartments
- Treadplate floor
- White powdercoat finish
- Taillight and Harness Adapter
- Compartment lighting throughout interior compartments
- 4” round bed lights in loadbed
- Tailshelf
- Aluminum treadplate surfaced, structurally supported, 30” deep tailshelf
- LED ICC lighting
- Curbside stepway access
- Bucket access step
- Aluminum grab loop access handle
- Angled chrome grab handle on rear compartment bulkhead
- Rear ICC bumper predrilled for hitch, trailer plug and equipped with chain loops
- Combination Hitch with 2” Ball
- 7 Pin Flat Trailer Plug