317 Rte 27, Raymond, NH 03077

Dur-A-Lift Custom Bucket Trucks & DINOlift Aerial Lifts

No items found.

Keenan Electrical Services

Build Overview

Lift Specs

  • DTAX-44-FP Insulated 44’ telescopic / articulating aerial platform lift. (IN STOCK)
  • 49’ of working height
  • 46 kV, Category Insulation
  • Platform capacity of 400 lbs./350 lbs. with liner.
  • Bucket mounted controls to include:
  • 3 Axis Single Hand Control
  • Tool selector
  • Hydraulic tool outlets with fittings
  • Emergency Power
  • Engine Start/Stop
  • Bucket Cover
  • Bucket Liner
  • 180º platform rotator.
  • Full pressure turret mounted lower controls with override.
  • Non-Continuous rotation.
  • Five GPM open center hydraulic system
  • Chassis insulating system
  • Lower Boom Insulating Section
  • Fiberglass inner telescopic boom.
  • Non-relube bearings used throughout.
  • Integral hydraulic oil reservoir with dual sight gauges and 17 gallon capacity.
  • Closed 24” x 30” x 42” fiberglass platform with one curbside step.
  • Platform cover, nylon/vinyl, 24” x 24”
  • Platform liner 24” x 30” x 42”
  • Emergency Power Insulated 12V DC hydraulic system.
  • Master / Slave hydraulic leveling with upper and lower control to tilt for cleanout or rescue.
  • Slimline H-frame outriggers, located front of body.
  • No loss of compartmentation
  • No extension into the lane of travel
  • Outrigger/Lift Interlocks
  • Upper boom storage cradle with ratchet type tie down strap and tubular rubber platform support.
  • Body belt and lanyard.
  • Standard white urethane paint.
  • Two operator’s manuals and two service manuals.
  • ANSI A92.2 Data plate.
  • 10 Gallon internal hydraulic tank
  • PTO operated hydraulic pump
  • Open circuit operation

Body Specs

  • Brand FX Fiberglass Service Body, FB-84
  • 125.75” long x 40” high x 94” wide.
  • 84” CA with dual rear wheels.
  • 40” compartment height
  • 18” compartment depth
  • 25” body mounting height
  • Standard Features:
  • Vinyl rock guards
  • Gas fill cup
  • Steel understructure
  • White compartment interiors
  • Recessed LED exterior stop/tail/turn, backup and ICC lighting
  • Automotive grade door gaskets
  • Aluminum forward bulkhead
  • Aluminum tailskirt
  • Stainless steel hinges and hardware
  • Stainless steel automotive style rotary latch
  • Brackets for adjustable shelves in all compartments
  • One piece molded doors
  • Recessed door seal system
  • Flow thru ventilation system
  • .1875 Aluminum treadplate floor
  • Tailboard brackets

Heading

TEST

Product Overview

Headings, paragraphs, blockquotes, figures, images, and figure captions can all be styled after a class is added to the rich text element using the "When inside of" nested selector system.

Rich Text Element

What’s a Rich Text element?

The rich text element allows you to create and format headings, paragraphs, blockquotes, images, and video all in one place instead of having to add and format them individually. Just double-click and easily create content.

The rich text element allows you to create and format headings, paragraphs, blockquotes, images, and video all in one place instead of having to add and format them individually. Just double-click and easily create content.

Static and dynamic content editing

Static and dynamic content editing

A rich text element can be used with static or dynamic content. For static content, just drop it into any page and begin editing. For dynamic content, add a rich text field to any collection and then connect a rich text element to that field in the settings panel. Voila!

A rich text element can be used with static or dynamic content. For static content, just drop it into any page and begin editing. For dynamic content, add a rich text field to any collection and then connect a rich text element to that field in the settings panel. Voila!

How to customize formatting for each rich text

How to customize formatting for each rich text

Headings, paragraphs, blockquotes, figures, images, and figure captions can all be styled after a class is added to the rich text element using the "When inside of" nested selector system.

Headings, paragraphs, blockquotes, figures, images, and figure captions can all be styled after a class is added to the rich text element using the "When inside of" nested selector system.

No items found.

Keenan Electrical Services

Build Overview

Lift Specs

  • DTAX-44-FP Insulated 44’ telescopic / articulating aerial platform lift. (IN STOCK)
  • 49’ of working height
  • 46 kV, Category Insulation
  • Platform capacity of 400 lbs./350 lbs. with liner.
  • Bucket mounted controls to include:
  • 3 Axis Single Hand Control
  • Tool selector
  • Hydraulic tool outlets with fittings
  • Emergency Power
  • Engine Start/Stop
  • Bucket Cover
  • Bucket Liner
  • 180º platform rotator.
  • Full pressure turret mounted lower controls with override.
  • Non-Continuous rotation.
  • Five GPM open center hydraulic system
  • Chassis insulating system
  • Lower Boom Insulating Section
  • Fiberglass inner telescopic boom.
  • Non-relube bearings used throughout.
  • Integral hydraulic oil reservoir with dual sight gauges and 17 gallon capacity.
  • Closed 24” x 30” x 42” fiberglass platform with one curbside step.
  • Platform cover, nylon/vinyl, 24” x 24”
  • Platform liner 24” x 30” x 42”
  • Emergency Power Insulated 12V DC hydraulic system.
  • Master / Slave hydraulic leveling with upper and lower control to tilt for cleanout or rescue.
  • Slimline H-frame outriggers, located front of body.
  • No loss of compartmentation
  • No extension into the lane of travel
  • Outrigger/Lift Interlocks
  • Upper boom storage cradle with ratchet type tie down strap and tubular rubber platform support.
  • Body belt and lanyard.
  • Standard white urethane paint.
  • Two operator’s manuals and two service manuals.
  • ANSI A92.2 Data plate.
  • 10 Gallon internal hydraulic tank
  • PTO operated hydraulic pump
  • Open circuit operation

Body Specs

  • Brand FX Fiberglass Service Body, FB-84
  • 125.75” long x 40” high x 94” wide.
  • 84” CA with dual rear wheels.
  • 40” compartment height
  • 18” compartment depth
  • 25” body mounting height
  • Standard Features:
  • Vinyl rock guards
  • Gas fill cup
  • Steel understructure
  • White compartment interiors
  • Recessed LED exterior stop/tail/turn, backup and ICC lighting
  • Automotive grade door gaskets
  • Aluminum forward bulkhead
  • Aluminum tailskirt
  • Stainless steel hinges and hardware
  • Stainless steel automotive style rotary latch
  • Brackets for adjustable shelves in all compartments
  • One piece molded doors
  • Recessed door seal system
  • Flow thru ventilation system
  • .1875 Aluminum treadplate floor
  • Tailboard brackets

Interested in a custom bucket truck or DINO for your business?
Get started today.