317 Rte 27, Raymond, NH 03077

Dur-A-Lift Custom Bucket Trucks & DINOlift Aerial Lifts

No items found.

Mass DOT

Build Overview

Lift Specs

  • DTAX-39-FP Insulated 39’ telescopic / articulating aerial platform lift.
  • 44’ of working height
  • 46 kV, Category Insulation
  • Platform capacity of 350 lbs.
  • Bucket mounted controls to include:
  • 4 Axis Single Hand Control
  • Tool selector
  • Hydraulic tool outlets with MassDOT compatible fittings
  • Emergency Power
  • Bucket Cover
  • Bucket Liner with integral step
  • 180º platform rotator.
  • Full pressure turret mounted lower controls with override.
  • Continuous rotation
  • Five GPM open center hydraulic system
  • Chassis insulating system
  • Lower Boom Insulating Section
  • Fiberglass inner telescopic boom
  • Non-relube bearings used throughout
  • Integral hydraulic oil reservoir with dual sight gauges and 17 gallon capacity
  • Closed 24” x 24” x 42” fiberglass platform with one curbside step
  • Emergency Power Insulated 12V DC hydraulic system
  • Master / Slave hydraulic leveling with upper and lower control to tilt for cleanout or rescue
  • Rear Torsion Bar
  • Front Timbren Load Bushings
  • Upper boom storage cradle with ratchet type tie down strap and tubular rubber platform support
  • Body belt and lanyard.
  • Standard white urethane paint.
  • Two operator’s manuals and two service manuals.
  • ANSI A92.2 Data plate.
  • 10 Gallon internal hydraulic tank
  • PTO driven hydraulics
  • Open circuit operation
  • Aerial painted, per MassDOT Safety Yellow

Body Specs

  • 132” long x 42” high x 94” wide
  • 84” CA with dual rear wheels
  • 42” compartment height
  • 18” compartment depth
  • 54” load space width
  • 25” top of body to the top of the floor
  • Vinyl rock guards
  • Gas fill cup
  • Removable wheel panels
  • White compartment interiors
  • LED exterior stop/tail/turn, backup and ICC lighting
  • Automotive grade door gaskets
  • Aluminum forward bulkhead
  • Aluminum tailskirt
  • Stainless steel hinges and hardware
  • Stainless steel automotive style rotary latch
  • Brackets for adjustable shelves in all compartments
  • One piece molded doors
  • Recessed door seal system
  • Flow thru ventilation system
  • Treadplate floor
  • Tailboard brackets
  • MassDOT “Safety Yellow” Gel Coat exterior
  • Flex Glo Compartment Lights
  • Streetside Compartmentation:
  • 1st vertical
  • 27” wide x 42” high x 18” deep
No items found.

Mass DOT

Build Overview

Lift Specs

  • DTAX-39-FP Insulated 39’ telescopic / articulating aerial platform lift.
  • 44’ of working height
  • 46 kV, Category Insulation
  • Platform capacity of 350 lbs.
  • Bucket mounted controls to include:
  • 4 Axis Single Hand Control
  • Tool selector
  • Hydraulic tool outlets with MassDOT compatible fittings
  • Emergency Power
  • Bucket Cover
  • Bucket Liner with integral step
  • 180º platform rotator.
  • Full pressure turret mounted lower controls with override.
  • Continuous rotation
  • Five GPM open center hydraulic system
  • Chassis insulating system
  • Lower Boom Insulating Section
  • Fiberglass inner telescopic boom
  • Non-relube bearings used throughout
  • Integral hydraulic oil reservoir with dual sight gauges and 17 gallon capacity
  • Closed 24” x 24” x 42” fiberglass platform with one curbside step
  • Emergency Power Insulated 12V DC hydraulic system
  • Master / Slave hydraulic leveling with upper and lower control to tilt for cleanout or rescue
  • Rear Torsion Bar
  • Front Timbren Load Bushings
  • Upper boom storage cradle with ratchet type tie down strap and tubular rubber platform support
  • Body belt and lanyard.
  • Standard white urethane paint.
  • Two operator’s manuals and two service manuals.
  • ANSI A92.2 Data plate.
  • 10 Gallon internal hydraulic tank
  • PTO driven hydraulics
  • Open circuit operation
  • Aerial painted, per MassDOT Safety Yellow

Body Specs

  • 132” long x 42” high x 94” wide
  • 84” CA with dual rear wheels
  • 42” compartment height
  • 18” compartment depth
  • 54” load space width
  • 25” top of body to the top of the floor
  • Vinyl rock guards
  • Gas fill cup
  • Removable wheel panels
  • White compartment interiors
  • LED exterior stop/tail/turn, backup and ICC lighting
  • Automotive grade door gaskets
  • Aluminum forward bulkhead
  • Aluminum tailskirt
  • Stainless steel hinges and hardware
  • Stainless steel automotive style rotary latch
  • Brackets for adjustable shelves in all compartments
  • One piece molded doors
  • Recessed door seal system
  • Flow thru ventilation system
  • Treadplate floor
  • Tailboard brackets
  • MassDOT “Safety Yellow” Gel Coat exterior
  • Flex Glo Compartment Lights
  • Streetside Compartmentation:
  • 1st vertical
  • 27” wide x 42” high x 18” deep

Interested in a custom bucket truck or DINO for your business?
Get started today.