317 Rte 27, Raymond, NH 03077
Dur-A-Lift Custom Bucket Trucks & DINOlift Aerial Lifts
.svg)
ATTN: Our office will be closed Monday, December 25th. Merry Christmas!
No items found.
Sertex Fiberoptic Splicer
Build Overview
Lift Specs
- DTA-35 35’ telescopic/articulated aerial, insulated
- Pedestal Riser, 43”
- 35’ of platform height
- 40’ of working height
- 21’ side reach
- Platform capacity of 350 lbs.
- Bucket configured as follows:
- 24” x 24” x 42”
- End hung bucket
- Walk thru bucket with door
- Full Pressure-Joystick Controls
- Emergency Power
- Engine Start/Stop
- Hard top bucket cover
- Telescopic riser for cover
- Bucket side drapes
- 360 degree Continuous rotation.
- Open center hydraulic system
- Non-relube bearings used throughout.
- Integral hydraulic oil reservoir with dual sight gauges
- Emergency Power Insulated 12V DC hydraulic system.
- Master / Slave hydraulic leveling with upper and lower control to tilt for cleanout or rescue.
- Lower remote controls mounted in rear compartment
- Rear “OVER FRAME” torsion bar stabilization
- Upper boom storage cradle with ratchet type tie down strap and tubular rubber platform support.
- Body harness and lanyard.
- Standard white urethane paint.
- Two operator’s manuals and two service manuals.
- ANSI A92.2 Data plate.
- Internal hydraulic tank
- Engine driven hydraulic pump
- Open circuit operation
- Emergency Brake Interlock
Body Specs
- Brand FX Fiberglass Service Body, BFXB-84
- 132” long x 42” high x 94” wide.
- 84” CA with dual rear wheels.
- 42” compartment height
- 20” compartment depth
- 25” body mounting height
- Standard Features:
- Vinyl rock guards
- Gas fill cup
- Aluminum understructure
- White compartment interiors
- Recessed LED exterior stop/tail/turn, backup and ICC lighting
- Automotive grade door gaskets
- Aluminum forward bulkhead
- Aluminum tailskirt
- Stainless steel hinges and hardware
- Stainless steel automotive style rotary latch
- LED Flexglo Compartment Lighting
- One piece molded doors
- Recessed door seal system
- Flow thru ventilation system
- Aluminum Treadplate floor
- Forward area to be “notched” to accommodate aerial device
Heading
TEST
Product Overview
Headings, paragraphs, blockquotes, figures, images, and figure captions can all be styled after a class is added to the rich text element using the "When inside of" nested selector system.
Rich Text Element
What’s a Rich Text element?
The rich text element allows you to create and format headings, paragraphs, blockquotes, images, and video all in one place instead of having to add and format them individually. Just double-click and easily create content.
The rich text element allows you to create and format headings, paragraphs, blockquotes, images, and video all in one place instead of having to add and format them individually. Just double-click and easily create content.
Static and dynamic content editing
Static and dynamic content editing
A rich text element can be used with static or dynamic content. For static content, just drop it into any page and begin editing. For dynamic content, add a rich text field to any collection and then connect a rich text element to that field in the settings panel. Voila!
A rich text element can be used with static or dynamic content. For static content, just drop it into any page and begin editing. For dynamic content, add a rich text field to any collection and then connect a rich text element to that field in the settings panel. Voila!
How to customize formatting for each rich text
How to customize formatting for each rich text
Headings, paragraphs, blockquotes, figures, images, and figure captions can all be styled after a class is added to the rich text element using the "When inside of" nested selector system.
Headings, paragraphs, blockquotes, figures, images, and figure captions can all be styled after a class is added to the rich text element using the "When inside of" nested selector system.
No items found.
Sertex Fiberoptic Splicer
Build Overview
Lift Specs
- DTA-35 35’ telescopic/articulated aerial, insulated
- Pedestal Riser, 43”
- 35’ of platform height
- 40’ of working height
- 21’ side reach
- Platform capacity of 350 lbs.
- Bucket configured as follows:
- 24” x 24” x 42”
- End hung bucket
- Walk thru bucket with door
- Full Pressure-Joystick Controls
- Emergency Power
- Engine Start/Stop
- Hard top bucket cover
- Telescopic riser for cover
- Bucket side drapes
- 360 degree Continuous rotation.
- Open center hydraulic system
- Non-relube bearings used throughout.
- Integral hydraulic oil reservoir with dual sight gauges
- Emergency Power Insulated 12V DC hydraulic system.
- Master / Slave hydraulic leveling with upper and lower control to tilt for cleanout or rescue.
- Lower remote controls mounted in rear compartment
- Rear “OVER FRAME” torsion bar stabilization
- Upper boom storage cradle with ratchet type tie down strap and tubular rubber platform support.
- Body harness and lanyard.
- Standard white urethane paint.
- Two operator’s manuals and two service manuals.
- ANSI A92.2 Data plate.
- Internal hydraulic tank
- Engine driven hydraulic pump
- Open circuit operation
- Emergency Brake Interlock
Body Specs
- Brand FX Fiberglass Service Body, BFXB-84
- 132” long x 42” high x 94” wide.
- 84” CA with dual rear wheels.
- 42” compartment height
- 20” compartment depth
- 25” body mounting height
- Standard Features:
- Vinyl rock guards
- Gas fill cup
- Aluminum understructure
- White compartment interiors
- Recessed LED exterior stop/tail/turn, backup and ICC lighting
- Automotive grade door gaskets
- Aluminum forward bulkhead
- Aluminum tailskirt
- Stainless steel hinges and hardware
- Stainless steel automotive style rotary latch
- LED Flexglo Compartment Lighting
- One piece molded doors
- Recessed door seal system
- Flow thru ventilation system
- Aluminum Treadplate floor
- Forward area to be “notched” to accommodate aerial device