- DHT-34FP Insulated telescopic aerial platform lift.
- 39’ of working height
- 26’ Side Reach
- Platform capacity:
- 350 lbs
- Bucket mounted hydraulic controls which include:
- 3 Axis Non-High Electrical Resistance “Single Stick” Control
- Emergency Power
- Engine Start/Stop
- 180 deg bucket rotator
- Bucket Lower Stow Control
- 24” x 30” x 42” fiberglass bucket
- Vinyl cover with lanyard
- Bucket Liner
- Insulation:
- Inner Telescopic Boom
- Upper Boom Wrap
- Stabilization:
- Torsion Bars on rear
- Timbren Load Stabilizer on front
- Safety:
- Parking Brake Interlock
- 360 deg Continuous rotation.
- Emergency Power Insulated 12V DC hydraulic system.
- 2 Year Warranty
- Capstan
- Advanced Construction Products, model #B30F capstan
- Brand FX Fiberglass Service Body, BFXB-84-T
- Body Dimensions:
- 132” long x 40” high x 94” wide.
- 84” CA with dual rear wheels.
- 48” compartment height
- 18” compartment depth
- 30” body mounting height
- .1875 Aluminum treadplate floor
- Tailboard brackets
- Aluminum lined loadbed walls
- Streetside Compartmentation:
- Front
- 30.5” wide
- Two (2) adjustable shelves
- 2nd Front
- 30.5” wide
- One (1) adjustable shelf
- Horizontal Compartment
- 40” wide
- One (1) adjustable shelf
- Rear Vertical
- 24.5” wide
- Open
- Curbside Compartmentation
- Front
- 30.5” wide
- Two (2) adjustable shelves
- 2nd Front
- 30.5” wide x 40” high x 18” deep
- Two (2) adjustable shelves
- Horizontal Compartment
- 40” wide
- Open layout
- Rear Vertical
- 31” wide
- 0-2-1 Rope Hooks
- Tailshelf
- Aluminum Treadplate surfaced, structurally supported, 30” deep tailshelf
- LED ICC lighting to include stop/turn/tail and back lights
- Curbside stepway access with aluminum grab loop access handle
- Flexible stepway access step
- Chrome grab handle on rear compartment bulkhead
- Rear ICC bumper with 2” receiver mounting for a future hitch, chain loops and 7 pin flat trailer socket with cover
- Striping
- Full width red/white conspicuity marking to be supplied on rear bumper
- 4” wide white “reverse Z” stripe
- Electrical:
- Warning Lights:
- Whelen 56” Justice Light Bar mounted on cab roof. The light bar will be configured as follows:
- Eight (8) forward facing red “CON 3” LED’s
- Whelen model #M7RC red LED’s with chrome flanges mounted as follows:
- Two (2) on cab grille
- Two (2) rear of body, mounted high
- Siren System:
- Whelen model #295SL100 Electronic Siren is to be provided and mounted on a upright vertical bracket on the cab floor
- One (1) Whelen model #SA315P speaker and appropriate mounting bracket|
- Floodlighting:
- Two (2) Akron Floods, model #ELRE-SLDC, 12 vdc LED floods shall have 19,000 lumens, and a local switch and are to be mounted as follows:
- One (1) telescopic on the curbside front body bulkhead.
- One (1) non-telescopic version mounted on top of the compartment side just forward of the step way
- Bucket Work Lighting:
- One (1) Streamlite E Flood LED Litebox with a 12 vdc charger is to be supplied and installed in the cab
- One (1) PTI LBH2-Y Bucket “hang-on” Mounting Box is to be supplied
- 120 VAC Power:
- Ultimate Power model #UP200SD, 2000 watt, Pure Sine Inverter, installed in front compartment Two (2) Deep Cycle batteries, in marine boxes installed in the forward load bed area. The inverter shall be properly fused, equipped with load sized cables and be covered in loom, Cab switch controlled operation
- Located on the rear of the body at the stepway a 120 VAC GFCI Duplex Outlet and a weatherproof Cover will be provided
- Ladder Rack:
- An Able Products, angled “top mounted” ladder rack is to be supplied. The ladder rack is to constructed of extruded aluminum, stainless steel hardware, include a guide rail system and a QUIK-LOCK locking, ladder restraint.
- Additional equipment:
- Two (2) Inclinometer, installed on cab dash, viewable by operator
- Two (2) Mudflaps
- Fire extinguisher with bracket, 5#
- Reflector kit
- First aid Kit
- Two (2) Composite wheel chocks
- One (1) Wilton model #674 Vise and mounting on tailshelf